Knowledge Base Home

Call Support


Search the Knowledge Base

Skip to end of metadata
Go to start of metadata

Environment

Netmail Archive 5.1 and higher

Synopsis

Before beginning, the installation files for WebViewer should be available to copy to the WebAccess server. The required files are located in the Netmail Archive installation files, in the following folder:

WebViewer/program files/Messaging Architects/.

 

Also needed is a program to copy the files between a Windows workstation (with the WebViewer files) and the WebAccess Linux server. We suggest WinSCP (http://winscp.net/download/winscp513setup.exe).

*The Paths shown below are based on a default installation of WebAccess and the paths may be different if you did not install to the default location.

 

1. Modify webacc.cfg file

Open the webacc.cfg file for editing. Modify the file by adding one of the two sections shown below to the webacc.cfg file; the section to be added depends on the version of Archive (i.e., Netmail or M+Archive).

If this is an update to an existing installation, it is enough to verify that this section is still in the webacc.cfg file (after certain webaccess updates, some of the required data can disappear from this section).

If this is the first installation of the WebViewer, add the appropriate section to the file after the “end of file” entry. *The default location for webacc.cfg is /var/opt/novell/groupwise/webaccess/webacc.cfg:*


For M+Archive:

##############################################################################
#TMA: Added for GW Records Manager (RM) Provider
###############################################################################
#------------------------------------------------------------------------------
#Specify the provider's class
#------------------------------------------------------------------------------
Provider.GWRMP.class=com.novell.webaccess.providers.GWRM.GWRMProvider
#------------------------------------------------------------------------------
#Specify the provider's templates folder.
#------------------------------------------------------------------------------
Templates.GWRMP.folder=GWRM
#------------------------------------------------------------------------------
#Specify the provider's configuration file.
#------------------------------------------------------------------------------
Provider.GWRMP.Config.file=/var/opt/novell/groupwise/webaccess/gwxmlv.cfg
#------------------------------------------------------------------------------
#Specify Record Managers. Separated by ';'
#------------------------------------------------------------------------------
Provider.GWRMP.Users=admin
###############################################################################
#TMA: Added for GWXML WebViewer Provider
###############################################################################
#------------------------------------------------------------------------------
#Specify the provider's class
#------------------------------------------------------------------------------
Provider.GWXMLV.class=com.novell.webaccess.providers.GWXMLV.GWANWP
#------------------------------------------------------------------------------
#Specify the provider's templates folder.
#------------------------------------------------------------------------------
Templates.GWXMLV.folder=GWXMLV
#------------------------------------------------------------------------------
#Specify the provider's configuration file.
#------------------------------------------------------------------------------
Provider.GWXMLV.Config.file=/var/opt/novell/groupwise/webaccess/gwxmlv.cfg
#------------------------------------------------------------------------------
#Specify super users. Separated by ';'
#------------------------------------------------------------------------------
Provider.GWXMLV.SuperUser.name=admin
#------------------------------------------------------------------------------
#setting for proxy, value: true or false
#------------------------------------------------------------------------------
Provider.GWXMLV.Proxy.disabled=false



For Netmail Archive:

###############################################################################
#TMA: Added for GWXML WebViewer Provider
###############################################################################
#------------------------------------------------------------------------------
#Specify the provider's class
#------------------------------------------------------------------------------
Provider.GWXMLV.class=com.novell.webaccess.providers.GWXMLV.GWANWP
#------------------------------------------------------------------------------
#Specify the provider's templates folder.
#------------------------------------------------------------------------------
Templates.GWXMLV.folder=GWXMLV
#------------------------------------------------------------------------------
#Specify the provider's configuration file.
#------------------------------------------------------------------------------
Provider.GWXMLV.Config.file=/var/opt/novell/groupwise/webaccess/gwxmlv.cfg
#------------------------------------------------------------------------------
#Specify super users. Separated by ';'
#------------------------------------------------------------------------------
Provider.GWXMLV.SuperUser.name=admin
#------------------------------------------------------------------------------
#setting for proxy, value: true or false
#------------------------------------------------------------------------------
Provider.GWXMLV.Proxy.disabled=false



2. Copy and modify gwxmlv.cfg

From the webviewer source install folder, modify the gwxmlv.cfg file and change the IP section to point to the IP address for the Remote Provider. Next, check the listed port to make sure it points to the Remote Provider. The default port for this is 6666.

After the file is update, copy it to the WebAccess server to the same folder containing the webacc.cfg file.



3. Copy WebViewer files to WebAccess

For M+Archive:

  • Copy folders GWXMLV_CSS and GWRM_CSS from the WebViewer installation folder to the WebAccess css folder.

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:     /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css.

  • Rename the copied folders and remove the _CSS from the end so you end up with GWXMLV and GWRM folders.

  • Copy the TMA_ files from the CSS folder from the WebViewer installation to the WebAccess css folder:

    • For Tomcat5:     /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:     /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css .

  • Copy the fldricon.inc file from the WebAccess css folder to GWXMLV folder.

  • Copy the caption.htt file GWXMLV8 folder in the WebViewer installation source to the WebAccess css folder, but *please backup the original caption.htt file on the WebAccess server before copying the new file over:*

    • For Tomcat5:     /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:     /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css.

  • Upload the provider folder from the WebViewer installation source to WebAccess providers folder:

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/com/novell/webaccess/providers
      For Tomcat6:    /srv/Tomcat6/webapps/gw/WEB-INF/classes/com/novell/webaccess/providers

  • Rename the copied provider folder to GWXMLV:

  • Copy the WebaccImages and GWRM_Image folders from the WebViewer installation source to the WebAccess images folder.
    *the numbered folder will be different for every installation

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/webaccess/200905140533/images

    • For Tomcat6:    /srv/Tomcat6/webapps/gw/webaccess/200905140533/images

  • Rename WebaccImages to GWXMLV, and GWRM_Image to GWRMP


For Netmail Archive:

  • Copy folders GWXMLV_CSS from the webviewer installation folder to the WebAccess css folder:

    • For Tomcat5:   /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:    /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css .

  • Rename the copied folder and remove the _CSS from the end so you end up with GWXMLV folder.

  • Copy the TMA_ files from the CSS folder from the WebViewer installation to the WebAccess css folder:

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:    /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css.

  • Copy the fldricon.inc file from the WebAccess css folder to GWXMLV folder.

  • Copy the caption.htt file GWXMLV8 folder in the WebViewer installation source to the WebAccess css folder, but *please backup the original caption.htt file on the WebAccess server before copying the new file over:*

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/templates/webacc/css
      ForTomcat6:    /srv/Tomcat6/webapps/gw/WEB-INF/classes/templates/webacc/css.

  • Upload the provider folder from the WebViewer installation source to WebAccess providers folder:

    • For Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/WEB-INF/classes/com/novell/webaccess/providers
      For Tomcat6:    /srv/Tomcat6/webapps/gw/WEB-INF/classes/com/novell/webaccess/providers

  • Rename the copied provider folder to GWXMLV

  • Copy the WebaccImages folder from the WebViewer installation source to the WebAccess images folder; * the numbered folder will be different for every installation:*

    • For  Tomcat5:    /srv/www/Tomcat5/base/webapps/gw/webaccess/200905140533/images

    • For  Tomcat6:    /srv/Tomcat6/webapps/gw/webaccess/200905140533/images

  • Rename WebaccImages to GWXMLV

4. Restart Services

  • Restart Tomcat to activate the modifications:

    • For Tomcat5:   service tomcat5 restart

    • For Tomcat6:   service tomcat6 restart

If the Archive button is not visible after the Tomcat service restart, a server restart may be required.

Notes


Help us improve!
Is this article helpful?
Is it well written?
Is the content complete?